| Collector |
| Size |
2030 mm L x 1030 mm W
x 100 mm H |
| Number of
Fins |
9
Nos. |
| Maximum
Working Pressure |
6 kg / sq. cm |
| Absorber
Material |
Electro Grade-Copper-Copper |
| Copper
Quality |
99.99% 0.02 Pure |
| Absorber
Coating |
Selectively
Coated Continuous Electroplating of Black
Chrome Copper Sheet |
| Riser
Tubes |
Copper tube of diameter
12.5 mm + 0.5mm, thickness 0.56 mm |
| Header
Tubes |
Copper tube of diameter
25mm + 0.5 mm, thickness 0.71 mm |
| Bonding
between Riser & Header |
High Quality Brazing |
| Bonding
between Absorber Sheet & Tube |
Ultrasonic Welding |
| Absorber
Flanges |
4 mm Thick, Brass Flanges,
63 mm Dia. |
| Absorber
Area |
2 sq. meter + 0.1 sq.
meter / Collector |
| Collector
Box |
Extruded Aluminum Solar
Section 100 mm x 25 mm |
| Collector
Bottom Sheet |
Aluminum, Thickness 0.71
mm |
| Glazing
|
Toughened glass, Thickness
4 mm Transitivity> 85% |
| Retainer
Angle for Glass |
Aluminum Angle, size 25
mm x 25 mm x 1.6 mm |
| Beading for
Glass |
High
Quality EPDM |
| Gasket and
Grommets |
High
Quality EPDM |
| Back
Insulation |
Resin bonded Rockwool
of 48kg/cm3 Thickness 50mm |
| Side
Insulation |
Rockwool Thickness 25
mm |
| Collector
Stand |
Corrosion Resistant Coated
MS |
| |
|
| Hot Water
Storage Tank |
| Storage Tank Material
|
Stainless
Steel, AISI 304 |
| Storage Tank Insulation |
Resin Bonded
Rockwool, Density 48 Kg/m3 Thickness 100mm |
| Outer Cladding |
Aluminum
Sheet, Thickness 0.71mm |
| Protective Coating |
Pure polyester
Powder Coated |
| Back-up Heater (Electrical) |
2 KW up to
300 LPD (Liters Per Day) |
| Inter Connecting Pipe |
EPDM Hose
Pipe |
| |
| Cold water
supply |
- Treated water, hardness below 200
PPM
- Bottom of the cold water supply over
head tank, 7 ft above roof level for
domestic systems, and 10 ft for non-domestic
systems
|
