| Collector |
Size |
2030 mm L x 1030 mm W
x 100 mm H |
| Number of
fins |
9
Nos. |
Maximum
Working Pressure |
6 kg / sq. cm |
Absorber
Material |
Electro Grade-Copper-Copper |
Copper
Quality |
99.99% 0.02 Pure |
| Absorber
Coating |
Selectively
Coated Continuous Electroplating of Black
Chrome Copper Sheet |
Riser
Tubes |
Copper tube of diameter
12.5 mm + 0.5mm, thickness 0.56 mm |
Header
Tubes |
Copper tube of diameter
25mm + 0.5 mm, thickness 0.71 mm |
Bonding
between Riser & Header |
High quality brazing |
Bonding
between Absorber sheet & Tube |
Ultrasonic Welding |
Absorber
Flanges |
4 mm thick, brass flanges,
63 mm Dia. |
Absorber
Area |
2 sq. meter + 0.1 sq.
meter / collector |
| Top Cover
/ Glazing |
Toughened
glass 4mm thick |
Collector
Box |
Extruded Aluminum Solar
Section 100 mm x 25 mm |
Collector
Bottom Sheet |
Aluminum stucco sheet |
Glazing |
Low Iron Magnet textured
glass for higher absorbity |
Retainer
Angle for Glass |
Aluminum Angle, size 25
mm x 25 mm x 1.6 mm |
| Beading for
Glass |
High
Quality EPDM |
| Gasket and
Grommets |
High
Quality EPDM |
Back
Insulation |
Resin bonded Rock wool
of 48kg/cm3 Thickness 50mm |
Side
Insulation |
Rock wool thickness 25
mm |
Collector
Stand |
Galvanized Mild Steel
Supports |
| |
|
| Hot Water
Storage Tank |
| Storage tank Material |
Stainless
Steel, AISI 304 |
| Heat Exchanging Material |
Stainless
Steel, AISI 304 |
| Storage Tank Insulation |
Resin Bonded
Rock Wool, Density 48kg/cm3 Thickness 100mm |
| Outer Cladding |
Aluminum
stucco sheet |
| Back-up Heater (Electrical) |
2 KW up to
300 LPD (Liters Per Day) |
| Inter Connecting Pipe |
Jindal Composite
tubes with brass fittings |
| |
| Cold water
supply |
- Treated water, hardness below 200
PPM
- Bottom of the cold water supply over
head tank, 7 ft above roof level for
Domestic systems, and 10 ft for Non-Domestic
systems
|
